|
Model 106 / 206-SC Solenoid Control Valve
|
The solenoid pilot valve provides two position (on-off) operation. The solenoid either admits inlet pressure into the main valve operating chamber or releases pressure from the operating chamber. The pilot system is usually piped to discharge at the valve outlet, but can be piped to discharge to drain (atmosphere). |
| |
|
Model 106 / 206-2SC-PCO Dual Solenoid Control for Positioning and SCADA Controls
|
The electronic control determines the valve function. Virtually any hydraulic function can be achieved using the "open-close" output from the controller to the valve. |
| |
|
Model 106 / 206-2SC-MV Electronic Flow Control and Metering System
|
Singer Model MV1 Electronic Flow Control and Metering Control Panel is specifically designed for Singer Model 2SC-MV Series of control valves. The MV1 Series of Control Panel is a self-contained panel designed to measure and control the flowrate without the need to add another inline-metering device. This metering function combined with its ability to control the flow provides simple operation and reduced installation requirements. The MV1 Series of Control Panel accepts industry standard 4-20mA continuous analog signals and can be tied directly to your SCADA system. |
| |
|
Model OCP OMNI Panel Series - SCADA or Local Control of Model 2SC-PCO Dual Solenoid Valves for Single Process
|
Model OCP control panel reads and compares the process feedback (PROCESS VARIABLE) 4 to 20mA signal to the desired setting (SETPOINT) 4 to 20mA signal. Model OCP then accurately positions the valve to bring the PROCESS VARIABLE towards the SETPOINT until they coincide. |
| |
|
Model MCP Multi Process Control Panel Series - SCADA or Local Control of Model 2SC-PCO Dual Solenoid Valves for Multiple Process
|
Model MCP control panel has the ability to monitor multiple processes and remotely control the dual solenoid control valve based on system conditions. The MCP is factory programmed and customized for application needs. The Model MCP control panel can function as a simple single loop controller (i.e. Pressure Reducing, Flow Control, Level Control) to multiple loop controller (i.e. Pressure Reducing and Pressure Sustaining, Flow Control and Level Control, etc.). Singer Model MCP reads transmitted signals and energizes the dual solenoid pilots on the Singer Control Valve. Singer Model MCP can react to any change in conditions by monitoring the system continuously. |
| |
|
Model SAP Surge Anticipator Panel
|
The Singer model SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. |
| |
|
Model SPC Pump Control Panel
|
The Singer model SPC pump control panel provides the interface between the pump motor starter and the Singer pump control valve. The SPC ensures that the pump starts and stops without causing line surges. |
| |
Model EPC
Single Process Controller
|
The Singer Valve model EPC is a single process loop controller designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. |
| |
Model ( )-420DC /
( )-420AC
Automated Pilot Control
|
The Singer Model ( )-420DC or ( )-420AC is a SCADA-based 420-mA motor operated pilot system that provides for a reliable, simple and cost efficient way to automate today's water systems. |
