HOME > PILOTS AND CONTROLS

Pilots and Controls

At Singer Valve, our pilots and controls offer you options and choices so you can meet the demand of your application requirements. Here are a few key products within our options and accessories line.

 

Model 160 Pressure Reducing PilotPR-160 Pressure Reducing Pilot
Self-cleaning. Self-flushing. Non-clogging.

This normally open pilot is spring and diaphragm operated. It has a non-clogging pilot guide stem above the diaphragm, which is removed from the flow of water in the main pilot chamber. Because the outlet is located in the bottom of the pilot, 90 degrees to the inlet, the pilot is self-cleaning and self-flushing, thereby eliminating debris build-up. It also minimizes turbulence and false readings. This is the standard pressure reducing pilot for all our pressure reducing valves.

 

 

301-4 Altitude Pilot Valve
Precise. Removable. Hydrostatic. 

The Altitude Pilot Valve is spring and diaphragm operated that controls the water level in a reservoir by sensing the hydrostatic head. Features include rolling seal frictionless design, stainless steel valve body and removable bottom cap. No power is required as the valve relies on the hydrostatic pressure from the reservoir/tank. Repeatability is long-term and precise.

 

 

26 Fixed Restriction26 Flow Stablizer
For flow control

The fixed restriction, a 303 stainless steel bodied fitting with a stainless steel orifice plug, controls the flow rate in the pilot system. The orifices are sized to provide the proper control to a select series of valve sizes only.

 

 

 

 

MCP-TP   Multi-Process Control Panel SeriesMCP-TP 
Versatile. Flexible. Precise. 

The Multi-Process Control Panel Series is a multiple process loop control panel designed to complement the Singer Model 2SC-PCO Dual Solenoid Control Valve. It can monitor and control single or multiple processes such as level, pressure, ∆P, flow, valve position or combinations thereof. The control panel can react to any change in conditions by monitoring the system continuously and comparing actual process values to desired set-point values. The control panel is factory programmed and customized for the application.