WATER WORKS

R-400 Modulating Float Pilot

The R-400 is a modulating float pilot with a plastic float, suitable for remote installation on a tank or reservoir. It positions the main valve in proportion to the reservoir level. Standard configuration is for the pilot to close on rising level. Specify “Reverse Acting” for the pilot to open on rising level. The polypropylene float connects to the pilot on a 10 in / 250 mm brass rod.

The R-400 pilot is used as the standard float pilot on all 106 and 206 series modulating float valves.

R-400 Modulating Float Pilot

• The pilot shall be a Singer Model R-400.
• The pilot shall be of the modulating style and made of brass and bronze construction.
• The inner valve shall utilize Buna-N seals to provide drip-tight shut-off in the valve body.
• The pilot shall include a 10 in / 250 mm brass float rod and a polypropylene float. The brass float rod shall pivot from the lever located on pilot.
• The pilot shall be self-cleaning and self-flushing by locating the outlet in the bottom of the pilot ninety degrees to the inlet.
• The pilot will close the valve on rising water level however the pilot will modulate between open and closed in direct proportion to reservoir level.
• Maximum working temperature: 120° F / 49° C
• Maximum working pressure: 80 psi / 5.5 bar

Download Specification Document

R-400 Modulating Float Pilot

For more information on the R-400:

Download the R-400 Product Guide.

Download the R-400 Operations Guide.

R-400 Modulating Float Pilot

To receive pricing on this product, please click below to contact a Singer Valve representative.